30"x 8.5" w/16" wheelbase
7Ply Hard Rock Maple
Single Kick
Iconic Super Sparkle Die-Cut Grip
Hand Screen Printed
Made in North America
Blue/ Silver
Ace 22 Classic Trucks
Alva Clear Blue Cruiser Wheels
Laser Cut Super Sparkle Grip
Abec7 Speed Bearings
1/4 Risers

30"x 8.5" w/16" wheelbase
7Ply Hard Rock Maple
Single Kick
Iconic Super Sparkle Die-Cut Grip
Hand Screen Printed
Made in North America
Silver/Red
Ace 22 Classic Trucks
Alva Clear Blue Cruiser Wheels
Laser Cut Super Sparkle Grip
Abec7 Speed Bearings
1/4 Risers

1980 PIG TEMPLATE
ACE TRUCKS
ALVA HIGH PERFORMANCE CRUISER WHEELS
ABEC-7 BEARINGS
ICONIC SUPER SPARKLE LASER CUT GRIP
RISER PADS

Die Cut Griptape
ACE 00 Trucks
Phasecaster Precision Bearings
Phasecaster 7/8 Hardware
Phasecaster Sofa Tone 56mm / 78a Wheels
Deck Size - 7.375 x 29 - 15.5 WB
Flat Top With Kick Tail
7 Ply Canadian Maple Skateboard
Custom Routered Wheel Wells
Hand Screen Printed
BBS MFG

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

1.25” Wide .375” Thick. Available in 14" and 13" Lengths. Full radius on both edges. 4-hole pattern! All edges and bevels are done by hand and may vary slightly from rail to rail.