.375” Thick, 13.5” long, .750” wide on blade, 1.875”wide on the motor. Medium round radius edge along the blade with the smaller radius around the motor.

.375” Thick, 13.5” long, .750” wide on blade, 1.875”wide on the motor. Medium round radius edge along the blade with the smaller radius around the motor.

.375” Thick, 13.5” long, .750” wide on blade, 1.875”wide on the motor. Medium round radius edge along the blade with the smaller radius around the motor.

.375” Thick, 13.5” long, .750” wide on blade, 1.875”wide on the motor. Medium round radius edge along the blade with the smaller radius around the motor.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

The Wide Boy Jawns went on a diet. These are slimmed down 1/4" and have holes down them for weight reduction. These are intended for 4-hole mounting but there are 6 extra countersunk holes that can be used in case of a hole getting worn out or a screw ripping through the bottom from getting snagged on something. These are 14" long, 1" wide, 3/8" with the same Wide Boy edge profile! All edges and bevels are done by hand and may vary slightly from rail to rail.

1.25” Wide .375” Thick. Available in 14" and 13" Lengths. Full radius on both edges. 4-hole pattern! All edges and bevels are done by hand and may vary slightly from rail to rail.

1.25” Wide .375” Thick. Available in 14" and 13" Lengths. Full radius on both edges. 4-hole pattern! All edges and bevels are done by hand and may vary slightly from rail to rail.

1.25” Wide .375” Thick. Available in 14" and 13" Lengths. Full radius on both edges. 4-hole pattern! All edges and bevels are done by hand and may vary slightly from rail to rail.

1.25” Wide .375” Thick. Available in 14" and 13" Lengths. Full radius on both edges. 4-hole pattern! All edges and bevels are done by hand and may vary slightly from rail to rail.

1.25” Wide .375” Thick. Available in 14" and 13" Lengths. Full radius on both edges. 4-hole pattern! All edges and bevels are done by hand and may vary slightly from rail to rail.

1.25” Wide .375” Thick. Available in 14" and 13" Lengths. Full radius on both edges. 4-hole pattern! All edges and bevels are done by hand and may vary slightly from rail to rail.

1.25” Wide .375” Thick. Available in 14" and 13" Lengths. Full radius on both edges. 4-hole pattern! All edges and bevels are done by hand and may vary slightly from rail to rail.

1.25” Wide .375” Thick. Available in 14" and 13" Lengths. Full radius on both edges. 4-hole pattern! All edges and bevels are done by hand and may vary slightly from rail to rail.